Do you like DIY home improvement and woodworking projects?
Perhaps someone in your family spends more time in the workshop than in the house!
If their obsession is more than a passing interest, they will most likely require a few tools to round out their "must-have" collection.
To assist you, here is a list of essential equipment that should be included in every workshop or garage collection to help you get things done faster, easier, and better.
Nobody can accurately “eyeball” something to tell whether it’s level or not, and slight errors will make frames, shelving, floorboards, or other objects look completely off-line. This tool takes all the guesswork away. In fact, it can’t hurt to have several levels of various lengths.
2) Putty Knife
A putty knife is great for scraping dry glues and paints and for spreading putty, paste and spackle. Having a 1½-inch size for scraping and a 5- or 6-inch one for spreading is infinitely helpful, and will pay itself back quickly over the years.
3) Reciprocating Saw
If you’re cutting wood for any number of home improvement and DIY projects, you will find that a reciprocating saw is an essential workshop tool. A reciprocating saw is an all-in-one tool that can take the place of several others. It uses a pull and push blade motion to cut in hard-to-reach places where no other type of saw can fit.
Pounding nails, pulling nails, tapping things into place — it almost goes without saying that you need a quality hammer. An expensive hammer is long and lightweight; its leverage can assist you when you take that wall down.
5) Power Drill
Drilling implies creating holes, and a power drill is the ultimate luxury when tired hands have turned too many screws. It adapts not only to drill bits to bore holes, but also to every kind of screw-head bit, making larger projects go quickly and with less muscle. Just be careful to stop when the fastener is tight, so you don’t strip the screw head. You will appreciate this tool’s power.
6) Utility Knife
From cutting paint around windows that are stuck closed to opening boxes, scoring drywall or even trimming the edges of carpet, the uses are so many that you’ll be surprised how you ever got by without one.
7) Cordless Grinder
For metal cutting, smoothing or grinding, nothing but a cordless grinder will do! If your projects involve masonry or concrete with misplaced rebar or anchor bolts, this handy tool will prove quite the workhorse over time. Or slice through plaster or stucco without ripping out the expanded metal lath.
8) Nail Set
A nail set is used for sinking nail heads below the surface of the wood, so that you can then fill the hole with wood putty and sand it, to make the nail disappear. This way the hammer never has to make an ugly dent in the surface you are pounding.
9) Tape Measure
Your tape measure is indispensable for estimating material quantities, figuring out placement of objects, and calculating floor plans and furniture sizes. It’s always a good idea to measure more than once to make sure you’ve got it right.
10) Miter Saw
A miter saw has a specialized blade that allows you to cut at a variety of angles, making it easily one of the most useful tools in the workshop. Making cuts for crown molding, picture frames, door frames, or window casings? A miter saw is your tool! The saw blade is mounted on a swing arm that pivots left or right to produce the perfect angled cuts each and every time.
11) Phillips Screwdriver
A Philips or X-shape screwdriver is probably one of the most common tools in any toolbox. If you have a handle that accepts interchangeable tips, you can cover a wide range of screw types and sizes.
12) Flathead Screwdriver
A flathead or straight screwdriver is invaluable; most light switch plates use straight screws, for example. Having the right size flathead can make a difference, so start with at least a set of three
(small, medium and large) to be able to handle most jobs.
At Flowyline Design, We offer Metal Table Legs Designs for your DIY home improvement and woodworking projects. These designer table legs that go especially well with any of your table tops, be it live edge, wood, or epoxy, be it your custom table, dining table, console table, or oval butcher block table.
These high quality metal table legs are exactly what you are looking for to support your custom table. Being powder-coated and made of steel and metal, the legs are built with sturdiness in mind. Great workmanship and designs can easily be observed from these legs
If you want to customize the legs to suit your tabletop or your bench, We're ready to help you. Live chat with us at flowyline.com or leave your email for a 3D drawing.